Description
Material:
Others:
Product Attributes:
Ordinary
Package Size:
190*170*40(mm)
Product Size:
Length: 5.30cm
Width: 3.50cm
Height: 1.90cm
Product Weight:
0.048kg
Packing Size:
Length: 19.00cm
Width: 17.00cm
Height: 4.00cm
Packing Weight:
0.065kg
Replacement Part Number: 22060-30P00 A53-600 M01 2206056E11, F3XY12A699A
Describe the 3rd product corresponding to the failure problem
- Incorrect air and fuel mixture: An incorrect air-fuel ratio can lead to ignition issues. Deposits in the cylinder: Dirt, grime, and contaminants can enter the cylinder, causing various problems.
- Defective, unhealthy, or incorrect spark plugs: Using the wrong type of spark plugs, plugs with buildup, or incorrect spark gaps can result in poor spark or incorrect spark timing.
- Improper timing: Sparks that do not fire at the correct moment can result in poor spark or incorrect timing, leading to abnormal combustion in the engine cylinders.
- Your Toyota’s oil pressure switch or oil pressure sensor: Communicates with the engine’s computer and will activate the oil light if the oil pressure is low. In some cases, these components can fail due to oil leaks and must be replaced to avoid catastrophic engine damage.
Product optimization and solution points
- The detonation sensor: Measures engine shake, is easy to install, and offers stable performance and strong resistance. The ignition advance angle adjusts when the engine shakes, ensuring the vehicle operates properly.
- Knock sensors: Protect the engine by helping to reduce power and accurately detect the vibrations caused by knocking, generating a voltage signal for the vehicle’s computer.
- The knock sensor: Is designed to prevent knocking or spark popping. It is sensitive, fuel-efficient, environmentally friendly, provides smooth acceleration, enhances power, eliminates cylinder noise and fault codes, and effectively addresses failure issues. It protects engine mechanical parts with high-quality components that are safe, stable, and durable.
The location where the product is installed
- The burst sensor: Is situated on the engine block or affixed to the side of the block or beneath the intake microfolders, generating an input voltage that the ECM uses to measure dynamic engine vibrations.
The composition and material quality of the product
- Constructed from high-quality metal and ABS plastic materials: It is durable and corrosion-resistant, adhering to strict quality control for stable features and high reliability.
- Made of quality materials: That are durable and corrosion-resistant, it effectively resolves failure issues while protecting the engine’s mechanical parts, ensuring high quality, safety, stability, and durability.
Description 4 Solve and help
- A knock sensor: Detects engine knocking or sound caused by abnormal combustion in the engine cylinder. It eliminates cylinder rattling and fault codes, effectively addressing malfunction issues and protecting engine mechanical components.
- This burst sensor: Is designed to respond to high burst frequencies, adapting to changes in engine burst frequency, making it a more flexible sensor that accurately determines the vibration produced by the burst and efficiently generates a voltage signal for your vehicle’s computer.
- The burst sensor: Is utilized to eliminate cylinder rattles and fault codes for effective troubleshooting, protecting mechanical engine components by sending signals to the Engine Control Module (ECM) to adjust timing and prevent detonation or spark bursts.
Confidence in quality
- Adhering to consistent OEM specifications: Ensures a perfect fit for related parts – durable and reliable material qualifications – multidisciplinary testing, including balanced housing durability and wheel load limiting seals, enhances the quality of each unit.
- Manufactured from high-quality materials: Under strict quality control, the ignition detonation sensor has stable characteristics and high reliability, enabling the vehicle computer to monitor the combustion chamber and adjust ignition timing or injector pulse width for optimal engine performance.
Description 5 Service & Maintenance
- 12 months warranty: If any issues arise during the one-year quality warranty period, please do not hesitate to contact us for a free replacement or refund.
Product Tips
- To avoid errors: Please double-check our product photos to ensure our products match your old parts and have the same sockets. Also, confirm that your vehicle type is listed in the parts description on the back.
- Please note: Check the car’s build model trim engine, product appearance, and part number to ensure this is the correct part you need. If you have any questions, please contact us for assistance.
- Please double-check: The connectors and compare your old parts with our pictures to ensure compatibility before purchasing. Failing to do so may lead to compatibility issues and return problems.
Compatible With INFINITI:
G20 2.0 Saloon 1990
The Knock Sensor 22060-30P00 is an essential component for enhancing the performance and longevity of various vehicle models, including the Altima, Frontier, Maxima, NX, Pathfinder, Pickup, Quest, Sentra, Xterra, Mercury Villager, and several Infiniti vehicles. This product is specifically designed to be installed on the engine block or affixed to the side of the block or beneath the intake manifold, where it measures engine vibrations and detects knocking sounds caused by abnormal combustion.
The versatility of this knock sensor is evident, as it serves a critical function across a wide range of automotive applications. It is suitable for both personal and commercial vehicles, ensuring proper engine performance and efficiency regardless of driving conditions. Whether you are a fleet manager needing reliable parts for multiple vehicles or an individual seeking to maintain your car’s engine health, the Knock Sensor 22060-30P00 offers adaptability and reliability in diverse automotive contexts.
Advantages of the Knock Sensor 22060-30P00
Choosing the Knock Sensor 22060-30P00 provides numerous advantages that set it apart from competitors. One of the most significant benefits is its ability to accurately detect engine knocking, which can lead to severe engine damage if left unaddressed. This sensor generates a voltage signal for the vehicle’s engine control module (ECM), enabling it to adjust the ignition timing and reduce power during instances of knocking.
This proactive approach not only enhances engine performance but also contributes to fuel efficiency and smoother acceleration. The sensor’s sensitivity and stable performance ensure that it effectively mitigates issues associated with incorrect air-fuel mixtures, defective spark plugs, and improper timing. Additionally, the high-quality construction of the Knock Sensor ensures durability and reliability, making it a preferred choice for customers looking to maintain or enhance their vehicle’s operational capabilities.
Quality and Construction
The quality of the Knock Sensor 22060-30P00 is paramount, as it is constructed from high-quality metal and ABS plastic materials that are both durable and corrosion-resistant. This attention to material selection ensures that the sensor can withstand the rigors of engine operation while maintaining stable features and high reliability.
The craftsmanship behind this product adheres to strict quality control standards, which means customers can trust that they are receiving a component that meets rigorous performance benchmarks. The knock sensor is designed to eliminate cylinder noise and fault codes effectively, addressing potential malfunction issues before they escalate. By protecting the engine’s mechanical parts, the Knock Sensor 22060-30P00 not only enhances performance but also contributes to the overall safety and longevity of the vehicle.
Bulk Purchasing Options
For businesses and individuals looking to procure the Knock Sensor 22060-30P00 in larger quantities, we offer favorable pricing options for bulk orders. This is an excellent opportunity for fleet operators, automotive repair shops, or any entity requiring multiple units to ensure consistent vehicle performance across their inventory.
We invite customers interested in bulk purchasing to contact us for more information and to explore the potential benefits of ordering in larger quantities. By reaching out, you can discover how the Knock Sensor 22060-30P00 can be a cost-effective solution for maintaining engine health in your vehicles, providing peace of mind and operational efficiency.
| Material | Others |
|---|---|
| Product Attributes | Ordinary |
| Package Size | 190*170*40(mm) |
