Description
Material
Others
Product Attributes
- Ordinary
Package Size
190*170*40(mm)
Product Size
- Length: 2.50cm
- Width: 5.50cm
- Height: 1.80cm
Product Weight
0.048kg
Packing Size
- Length: 19.00cm
- Width: 17.00cm
- Height: 4.00cm
Packing Weight
0.067kg
Replacement Part Number:
22060-7B000, 550566, 80238035302, 84.041, LVKN189, xf5212a699aa, XF5Z12A699A, QF00T01285, QF50A00024, XKS133, 84.041, EKS136, LKS130, 411790035, WG1408404, WG1493796
FIT VEHICLES
1999-2002 for Mercury Villager,
1999-2004 for Nissan Frontier,
2000 for Nissan Pathfinder,
1999-2002 for Nissan Quest,
2000-2004 for Nissan Xterra,
2000-2004 for Nissan Xterra
Describe the 3rd product corresponding to the failure problem
- Incorrect air and fuel mixture: An incorrect air-to-fuel ratio can result in ignition issues. Deposits in the cylinder: Dirt, grime, and contaminants can enter the cylinder and create various problems.
- Defective, unhealthy, or incorrect spark plugs: Using the wrong type of spark plugs, plugs with deposit buildup, or incorrect spark gap can result in poor spark or improper spark timing.
- Improper timing: Sparks that do not fire at the correct time can lead to poor spark or incorrect spark timing, causing abnormal combustion within the engine cylinders.
- Your Toyota’s oil pressure switch or oil pressure sensor: Communicates with the engine’s computer and will illuminate the oil light if the oil pressure is low. In certain instances, they may fail due to oil leaks and need to be replaced to avert catastrophic engine damage.
Product optimization and solution points
- The detonation sensor: Designed to measure the level of engine shake, is easy to install, offers stable performance, and has strong resistance. The ignition advance angle is adjusted when the engine shakes, ensuring the vehicle operates correctly.
- Knock sensors: Are implemented to safeguard the engine and assist in reducing engine power, built to accurately detect the vibrations caused by a knock and effectively generate a voltage signal for the vehicle’s computer.
- The knock sensor: Is a device employed to prevent knocking or spark popping. With sensitive detection, it saves fuel and protects the environment, facilitating smooth acceleration, enhancing power, eliminating cylinder noise, and fault codes, while effectively addressing failure issues. It safeguards the engine’s mechanical components, ensuring high-quality parts that are safe, stable, and durable.
The location where the product is installed
- The burst sensor: Is situated on the engine block or is screwed into the side of the block or beneath the intake microfolders, generating an input voltage that the ECM utilizes to measure dynamic engine vibrations.
The composition and material quality of the product
- Crafted from high-quality ABS plastic material: This product is durable and resistant to corrosion, produced under strict quality control for stable features and high reliability.
- Made from quality material: It is durable and corrosion-resistant, effectively addressing failure issues. It protects the engine’s mechanical components with high-quality parts that are safe, stable, and durable.
Description 4: Solve and help
- A knock sensor: Is a device intended to prevent knocking or spark popping. It detects engine knocking or sounds caused by abnormal combustion in the engine cylinder, eliminating cylinder rattling and fault codes, effectively resolving malfunction problems. It protects engine mechanical components.
- This burst sensor: Is engineered to respond to high burst frequencies, adapting to changes in engine burst frequency, making it a more versatile sensor that accurately responds to the correct engine burst across a broad range of vehicle conditions, effectively determining the vibrations generated by the burst and efficiently producing a voltage signal for the vehicle’s computer.
- The burst sensor: Is utilized to eliminate cylinder rattles and fault codes for successful troubleshooting, safeguarding mechanical engine components by sending signals to the Engine Control Module (ECM) to adjust timing and prevent detonation or spark bursts.
Confidence in quality
- Consistent with OEM specifications: To guarantee a perfect fit of related parts – Durable and reliable material qualifications – Multidisciplinary testing, including balanced housing durability and wheel load limiting seals, among others, to enhance the quality of each unit.
- Manufactured from high-quality materials: Under stringent quality control, the ignition detonation sensor possesses stable characteristics and high reliability, enabling the vehicle computer to monitor the combustion chamber, advance or delay ignition, and adjust valve timing or injector pulse width for optimal engine performance.
Description 5: Service & Maintenance
- 12
The Ignition Knock Detonation Sensor 22060-7B000 is an essential component for vehicles such as the Nissan Frontier, Pathfinder, Quest, Xterra, and Mercury Villager, specifically designed for models from 1999 to 2004. This sensor plays a critical role in automotive performance and efficiency by accurately detecting engine vibrations and adjusting the ignition timing accordingly.
The versatility of this product allows it to be utilized in various automotive settings, ensuring that drivers experience optimal engine performance and reduced emissions. Its application is particularly beneficial in scenarios where vehicles are subjected to different driving conditions, including city driving, highway cruising, and off-road adventures. With its reliable functionality, the Ignition Knock Detonation Sensor is a vital part of any vehicle maintenance or repair routine, enhancing the overall driving experience.
Unique Advantages
The unique advantages of the Ignition Knock Detonation Sensor 22060-7B000 make it a standout choice in the aftermarket automotive parts market. One of its key benefits is its ability to prevent engine knocking, which can lead to significant damage and reduced vehicle performance. This sensor not only helps in maintaining proper ignition timing but also contributes to fuel efficiency by optimizing the air-fuel mixture, thus saving drivers money at the pump.
Furthermore, its easy installation process ensures that both professional mechanics and DIY enthusiasts can replace old or faulty sensors with minimal hassle. Compared to alternative products, this sensor’s precision in detecting vibrations and generating voltage signals for the vehicle’s computer system enhances its reliability, making it a preferred option for those seeking quality and performance in their vehicle parts.
Quality Assurance
Quality is paramount when it comes to automotive components, and the Ignition Knock Detonation Sensor 22060-7B000 does not compromise on this aspect. Manufactured from high-quality ABS plastic, the sensor exhibits excellent durability and corrosion resistance, ensuring longevity even in harsh engine environments.
The production of this sensor adheres to strict quality control standards, guaranteeing stable performance and reliability under various operating conditions. Its craftsmanship is designed to withstand the rigors of engine operation, providing peace of mind to vehicle owners that their engine management system will function correctly over time.
The robust construction and dependable performance of this sensor not only enhance engine efficiency but also protect vital engine components, making it an investment worth considering for anyone looking to maintain their vehicle’s health.
Bulk Orders
For customers looking to purchase the Ignition Knock Detonation Sensor 22060-7B000 in larger quantities, we offer favorable pricing on bulk orders. This is an excellent opportunity for automotive businesses, repair shops, or fleet operators to stock up on essential components while enjoying cost savings.
We encourage potential bulk buyers to contact us for more information regarding pricing and availability. Our team is ready to assist you with inquiries and help you make the most informed decision for your automotive needs. Don’t miss out on this chance to enhance your inventory and ensure that you are equipped with high-quality parts that can improve vehicle performance and customer satisfaction.
Contact us today for further details on bulk orders and to discover the benefits of partnering with us for your automotive supply needs.
| Material | Others |
|---|---|
| Product Attributes | Ordinary |
| Package Size | 190*170*40(mm) |
